We've done it again, just so you didnt have to....
Unleash the Vintage Magic: We proudly present 18 brand New Series 2 Pultec EQ1PA Profiles for BYOD.
Lose that digital edge, just hear the real Pultec tube smoothness, listen to your audio come to life like no other digital plugin can do..
You are looking at around 9k to run a matched pair of stereo Pultecs across your bus!!, now you can run as many as you like! you can even track through these presets at 0 latency.
I guarantee that your productions will never be the same again after using these amazing presets. We have carefully crafted 18 of the most useful settings, used by professional producers in major studios day after day. We worked hour after hour A/B'ing and making sure that these presets were perfect and ready to go straight into your productions. Be amazed at how little work you need to do on your source audio after processing them with the Pultec Profiles ;-)
If you Walk into any world-class control room you’ll see one or more classic tube Pultecs – it’s as true now as it was in 1978! The Pultec EQP-1A two-band equalizer, the modern-day re-creation of the legendary tube EQ, can give your tracks the massive bass, silky air, and addictive warmth that made the original a studio standard. Pulse Techniques is back, hand-crafting their classic EQs without compromise or “enhancement” to the original designs. New Pultecs like the EQP-1A contain only original-spec components and are dead ringers for their vintage ancestors. It may sound like magic, but it’s time-tested and proven – the Pultec EQP-1A equalizer can make any track sound better.
Take a look at the Pultec EQP-1A and you’ll see it’s not designed like your typical equalizer. The two-band design basically gives you flexible high-shelving and low-shelving control, with a twist. Because the boost and attenuate controls work independently you can use an old trick to add weight to the bass region while also notching a bit above the cutoff point, by boosting and attenuating at the same time (try it on kick drum and you’ll never look back). On the high-shelf side things are similar, except you can set separate ranges for the boost and attenuation. Said another way, you can boost at 12kHz and cut at 5k, adding “air” to a track without increasing presence.
You’ve heard them on countless hits. The 3-rackspace blue Pultec EQP-1A was originally made from 1961 until 1971, when it was replaced by the 2U silver-faced EQP-1A3. While the EQP-1A3 was functionally identical to the EQP-1A, many engineers and studio owners swear by the original 3U “true-blue” unit. This inspired design places a tube-driven, push-pull gain-makeup stage after the EQ section to eliminate the gain insertion losses typical of passive filters. Intended for broad program EQ, the EQP-1A gives you four low boost/cut frequencies, three high-cut frequencies, and your choice of seven HF boost points, along with a bandwidth control for shaping high-boost Q.
The name Pultec commands reverence. Magical tools revered for their ability to improve the sound of audio simply by passing signal through them, Pultec equalizers like the EQP-1A are the stuff of legend. They’re all over many of your favorite records. Rare vintage units cost a pretty penny – if you can find one in good working order. So naturally, there have been many hardware and software “re-creations” over the years. Well, now you can grace your recordings with the sweet sound of the EQP-1A: a genuine Pultec EQ.
We even included a Bonus preset designed specifically to enhance and bring out your vocasl by sampling the Pultec straight through the Teletronix La2a! try it, it's exquisite We've really gone the extra mile for you all on this pack and we hope that you enjoy using it as much as we have creating it!